sales@tipsnano.com
more contacts
 
NSG10_DLC
NSG10_DLC

NSG10_DLC

NSG10_DLC/10
Set of 10 probes
€600 +
Аdd to cart
NSG10_DLC/50
Set of 50 probes
€2,500 +
Аdd to cart

Product Description

Super Sharp Diamond-Like Carbon (DLC) tips with typical curvature radius 1nm grown on the probe series NSG10, resonance frequency 255 kHz, force constant11.5 N/m.

Super sharp diamond-like carbon (DLC) tips* with typical curvature radius 1nm are extremely useful for obtaining high resolution imaging on objects with sizes of several nanometers. DLC tips have very long lifetime due to the high material durability.

DLC tips can be grown on any standard probe series.

To guarantee 20nm working length of DLC tips TEM is used. 10% from total number of probes in the batch are selected for testing. At least 80% of those probes should have the only DLC tip which lengh is exceeded by 20nm others DLC tips on the same probe. In this case the whole batch is considered as passed the TEM test. On the surfaces with roughness bigger than 20nm double images are possible.

     DNA.jpg Topography image of poly(dG)– poly(dG)–poly(dC) triplex DNA obtained by NSG01_DLC tip.   
 
Cross.jpg

The graph shows a cross-section of the image along the line 1. The average distance between adjacent peaks on cross-sections is 3.3 nm.Tapping mode in air.  

Image courtesy of Dr. D. Klinov (Shemyakin- Ovchinnikov IBC, RAS, Russia).  


General Features

Material Single Crystal Silicon
DLC material Diamond-Like Carbon
DLC working length < 20 nm
Chip size 3.6x1.6x0.4mm
Chip size 3.6x1.6x0.4mm
Reflective side coating Au
Tip coating No
Tip curvature radius 1-3nm

Special Features

Cantilever series Cantilever length, L±5µm Cantilever width, W±3µm Cantilever thickness, T±0.5µm Resonant frequency, kHz Force constant, N/m
min typical max min typical max
NSG10_DLC 100 35 2.0 190 255 325 5.5 11.5 22.5
 

successfully added to cart!

Continue shoppingGo to cart