more contacts


5 separated chips
€2,250 +
Аdd to cart

Product Description

Calibrated Unique probes with Single Crystal Diamond tip specially designed for Nanoindentation, Nanoscratching, Lithography etc. Resonant frequency 500-1000kHz, force constant 100-600 N/m, curvature radius <15nm.

These tips are specifically designed for high mechanical loads and scratch testing applications. By using wear-resistant diamond and a board cone angle the contact size is well characterized and stays constant during repeated mechanical measurements. These probes have demonstrated highly repeatable deep (~100nm) indentations into materials such as fused silica and are able to image the indents at high resolution in-situ using the same probe. A gold reflex coating deposited on the detector side of the cantilever to enhance the reflectance of the laser beam.

The probes are shipped with individually measured spring constant and a high resolution SEM image showing tip radius and cone angle.  These probes are essentional for highly accurate nanoindentation and quantitative nanomechanics for materials in the 10-100 GPa range. 

Nominal values: force constant - 350 N/m, resonance frequency – 750 kHz.

Cantilever specifications

Geometry: Rectangular
Material:   Diamond coated Si  
  Cantilever bending:  < 3°

Bulk tip specifications

Si geometry:      Standard  
   Si tip height (h):          15 ± 2 μm
Front angle: 25 ± 2°
Back angle: 15 ± 5°
Side angle:    22.5 ± 5°
Tip offset:    15 - 25 μm

Single crystal diamond tip specifications

Geometry: Cone
Tip radius:     <15 nm 
       Tip height (h):          500 nm ± 100 nm
Tilt angle: 0 ± 1°
Tip material:    Diamond
Cone ½ angle:    45 ± 10°

General Features

Chip size 3.4x1.6x0.3
Reflective side coating Au
Tip coating Single crystal diamond
Tip curvature radius typical 10nm, guaranteed <15nm

Special Features

Cantilever series Cantilever length, L±10µm Cantilever width, W±5µm Cantilever thickness, T±0.5µm Resonant frequency, kHz Force constant, N/m
min typical max min typical max
DPR_In_C 125 30 4.0 500 750 1000 100 350 600

successfully added to cart!

Continue shoppingGo to cart